nolimit974
01-09-2008, 11:14 PM
Well it's me again...I am having problems burning cds in k3b. I can burn dvds but not cds. When I try to burn a cd it tells me that cdrecord has no permission to open device.
cdrecord -scanbus gives me this
[nolimit974@nolimit974 ~]$ cdrecord -scanbus
scsibus1:
1,0,0 100) 'HL-DT-ST' 'DVDRAM GSA-4081B' 'A104' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
and ls -al /usr/bin/cdrecord gives me this.
lrwxrwxrwx 1 root root 5 2007-10-03 09:32 /usr/bin/cdrecord -> wodim
now what is wrong with this? Help is like always....appreciated.
System
-----------------------
K3b Version: 1.0.4
KDE Version: 3.5.8-7.fc8 Fedora
QT Version: 3.3.8
Kernel: 2.6.23.9-85.fc8
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4081B A104 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW] [DVD-ROM, DVD-R Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite]
Used versions
-----------------------
cdrecord: 1.1.6
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4081B'
Revision : 'A104'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
Drive DMA Speed: 11298 kB/s 64x CD 8x DVD
FIFO size : 4194304 = 4096 KB
pregap1: -1
Track 01: audio 77 MB (07:40.60) no preemp swab copy
Track 02: audio 32 MB (03:15.24) no preemp swab copy
Track 03: audio 49 MB (04:53.28) no preemp swab copy
Track 04: audio 42 MB (04:13.78) no preemp swab copy
Track 05: audio 49 MB (04:51.58) no preemp swab copy
Track 06: audio 32 MB (03:12.45) no preemp swab copy
Track 07: audio 41 MB (04:06.10) no preemp swab copy
Track 08: audio 26 MB (02:35.06) no preemp swab copy
Track 09: audio 41 MB (04:04.88) no preemp swab copy
Track 10: audio 46 MB (04:34.45) no preemp swab copy
Track 11: audio 20 MB (02:02.08) no preemp swab copy
Track 12: audio 51 MB (05:06.18) no preemp swab copy
Total size: 510 MB (50:35.72) = 227679 sectors
Lout start: 511 MB (50:37/54) = 227679 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
Speed set to 2822 KB/s
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 132167
Starting to write CD/DVD at speed 16.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 04 00 00 00 00 10 34 10 04 80 09 01 00 00
Sense Key: 0x4 Hardware Error, deferred error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1176 K BSize: 1176 K
Starting new track at sector: 0
Track 01: 0 of 77 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 17.047s
Average write speed 178.8x.
Fixating...
Fixating time: 0.007s
/usr/bin/wodim: fifo had 64 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=16 -dao driveropts=burnfree -eject -useinfo -audio /tmp/kde-root/k3b_audio_0_01.inf /tmp/kde-root/k3b_audio_0_02.inf /tmp/kde-root/k3b_audio_0_03.inf /tmp/kde-root/k3b_audio_0_04.inf /tmp/kde-root/k3b_audio_0_05.inf /tmp/kde-root/k3b_audio_0_06.inf /tmp/kde-root/k3b_audio_0_07.inf /tmp/kde-root/k3b_audio_0_08.inf /tmp/kde-root/k3b_audio_0_09.inf /tmp/kde-root/k3b_audio_0_10.inf /tmp/kde-root/k3b_audio_0_11.inf /tmp/kde-root/k3b_audio_0_12.inf
that is the debuging info in k3b run in a terminal as root after the error occurs
and this is what appears in the terminal
(K3bDevice::HalConnection) lock queued for /org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_4081B
(K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_4081B
removing udi /org/freedesktop/Hal/devices/volume_empty_cd_r
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
Launched ok, pid = 4359
cdrecord -scanbus gives me this
[nolimit974@nolimit974 ~]$ cdrecord -scanbus
scsibus1:
1,0,0 100) 'HL-DT-ST' 'DVDRAM GSA-4081B' 'A104' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
and ls -al /usr/bin/cdrecord gives me this.
lrwxrwxrwx 1 root root 5 2007-10-03 09:32 /usr/bin/cdrecord -> wodim
now what is wrong with this? Help is like always....appreciated.
System
-----------------------
K3b Version: 1.0.4
KDE Version: 3.5.8-7.fc8 Fedora
QT Version: 3.3.8
Kernel: 2.6.23.9-85.fc8
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4081B A104 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW] [DVD-ROM, DVD-R Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite]
Used versions
-----------------------
cdrecord: 1.1.6
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4081B'
Revision : 'A104'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
Drive DMA Speed: 11298 kB/s 64x CD 8x DVD
FIFO size : 4194304 = 4096 KB
pregap1: -1
Track 01: audio 77 MB (07:40.60) no preemp swab copy
Track 02: audio 32 MB (03:15.24) no preemp swab copy
Track 03: audio 49 MB (04:53.28) no preemp swab copy
Track 04: audio 42 MB (04:13.78) no preemp swab copy
Track 05: audio 49 MB (04:51.58) no preemp swab copy
Track 06: audio 32 MB (03:12.45) no preemp swab copy
Track 07: audio 41 MB (04:06.10) no preemp swab copy
Track 08: audio 26 MB (02:35.06) no preemp swab copy
Track 09: audio 41 MB (04:04.88) no preemp swab copy
Track 10: audio 46 MB (04:34.45) no preemp swab copy
Track 11: audio 20 MB (02:02.08) no preemp swab copy
Track 12: audio 51 MB (05:06.18) no preemp swab copy
Total size: 510 MB (50:35.72) = 227679 sectors
Lout start: 511 MB (50:37/54) = 227679 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
Speed set to 2822 KB/s
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 132167
Starting to write CD/DVD at speed 16.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 04 00 00 00 00 10 34 10 04 80 09 01 00 00
Sense Key: 0x4 Hardware Error, deferred error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1176 K BSize: 1176 K
Starting new track at sector: 0
Track 01: 0 of 77 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 17.047s
Average write speed 178.8x.
Fixating...
Fixating time: 0.007s
/usr/bin/wodim: fifo had 64 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=16 -dao driveropts=burnfree -eject -useinfo -audio /tmp/kde-root/k3b_audio_0_01.inf /tmp/kde-root/k3b_audio_0_02.inf /tmp/kde-root/k3b_audio_0_03.inf /tmp/kde-root/k3b_audio_0_04.inf /tmp/kde-root/k3b_audio_0_05.inf /tmp/kde-root/k3b_audio_0_06.inf /tmp/kde-root/k3b_audio_0_07.inf /tmp/kde-root/k3b_audio_0_08.inf /tmp/kde-root/k3b_audio_0_09.inf /tmp/kde-root/k3b_audio_0_10.inf /tmp/kde-root/k3b_audio_0_11.inf /tmp/kde-root/k3b_audio_0_12.inf
that is the debuging info in k3b run in a terminal as root after the error occurs
and this is what appears in the terminal
(K3bDevice::HalConnection) lock queued for /org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_4081B
(K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_4081B
removing udi /org/freedesktop/Hal/devices/volume_empty_cd_r
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
Launched ok, pid = 4359