Problems with USB devices [Archive]

theplatypus

11-26-2006, 10:49 AM

I'm unable to access any USB devices. Using Ubuntu Dapper with kernel 2.6.15-27-k7. They used to work perfectly and without any changes to the system they have suddenly stopped. Here is the output of dmesg.

dmesg
[17179569.184000] Linux version 2.6.15-27-k7 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:35:20 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia ) @ 0x000f75c0
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff74c0
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2079.682 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.444000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.444000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179570.472000] Memory: 1027208k/1048512k available (2103k kernel code, 20568k reserved, 599k data, 332k init, 131008k highmem)
[17179570.472000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.552000] Calibrating delay using timer specific routine.. 4163.86 BogoMIPS (lpj=8327725)
[17179570.552000] Security Framework v1.0.0 initialized
[17179570.552000] SELinux: Disabled at boot.

theplatypus

11-26-2006, 10:53 AM

and the rest of dmesg The debounce failed error repeats for hundreds of lines.

[17179570.552000] Mount-cache hash table entries: 512
[17179570.552000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.552000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.552000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.552000] CPU: L2 Cache: 512K (64 bytes/line)
[17179570.552000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179570.552000] mtrr: v2.0 (20020519)
[17179570.552000] Enabling fast FPU save and restore... done.
[17179570.552000] Enabling unmasked SIMD FPU exception support... done.
[17179570.552000] Checking 'hlt' instruction... OK.
[17179570.568000] SMP alternatives: switching to UP code
[17179570.568000] checking if image is initramfs... it is
[17179571.072000] Freeing initrd memory: 6763k freed
[17179571.088000] ACPI: Looking for DSDT ... not found!
[17179571.088000] CPU0: AMD Athlon(tm) XP 2800+ stepping 00
[17179571.088000] Total of 1 processors activated (4163.86 BogoMIPS).
[17179571.088000] ENABLING IO-APIC IRQs
[17179571.088000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179571.232000] Brought up 1 CPUs
[17179571.232000] NET: Registered protocol family 16
[17179571.232000] EISA bus registered
[17179571.232000] ACPI: bus type pci registered
[17179571.248000] PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
[17179571.248000] PCI: Using configuration type 1
[17179571.248000] ACPI: Subsystem revision 20051216
[17179571.256000] ACPI: Interpreter enabled
[17179571.256000] ACPI: Using IOAPIC for interrupt routing
[17179571.256000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.256000] PCI: Probing PCI hardware (bus 00)
[17179571.260000] PCI: nForce2 C1 Halt Disconnect fixup
[17179571.260000] Boot video device is 0000:02:00.0
[17179571.260000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.308000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179571.308000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179571.312000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.312000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.312000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.312000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.312000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.312000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.312000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.312000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.312000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.312000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.312000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.312000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.312000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.316000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.316000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.316000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.316000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[17179571.316000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[17179571.316000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[17179571.316000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[17179571.316000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179571.316000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[17179571.316000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[17179571.316000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[17179571.316000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[17179571.316000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[17179571.316000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[17179571.320000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[17179571.320000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[17179571.320000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[17179571.320000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[17179571.320000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[17179571.324000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.324000] pnp: PnP ACPI init
[17179571.328000] pnp: PnP ACPI: found 16 devices
[17179571.328000] PnPBIOS: Disabled by ACPI PNP
[17179571.328000] PCI: Using ACPI for IRQ routing
[17179571.328000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.368000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[17179571.368000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[17179571.368000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[17179571.368000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[17179571.368000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[17179571.368000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[17179571.368000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[17179571.368000] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[17179571.368000] PCI: Bridge: 0000:00:08.0
[17179571.368000] IO window: disabled.
[17179571.368000] MEM window: e7000000-e7ffffff
[17179571.368000] PREFETCH window: disabled.
[17179571.368000] PCI: Bridge: 0000:00:1e.0
[17179571.368000] IO window: disabled.
[17179571.368000] MEM window: e4000000-e6ffffff
[17179571.368000] PREFETCH window: d0000000-dfffffff
[17179571.368000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179571.368000] audit: initializing netlink socket (disabled)
[17179571.368000] audit(1164533727.364:1): initialized
[17179571.368000] highmem bounce pool size: 64 pages
[17179571.368000] VFS: Disk quotas dquot_6.5.1
[17179571.368000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.368000] Initializing Cryptographic API
[17179571.368000] io scheduler noop registered
[17179571.368000] io scheduler anticipatory registered
[17179571.368000] io scheduler deadline registered
[17179571.368000] io scheduler cfq registered
[17179571.368000] isapnp: Scanning for PnP cards...
[17179571.724000] isapnp: No Plug & Play device found
[17179571.736000] Real Time Clock Driver v1.12
[17179571.736000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.740000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.740000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.740000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179571.740000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.740000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.744000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.744000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.744000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.744000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.744000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.744000] mice: PS/2 mouse device common for all mice
[17179571.744000] EISA: Probing bus 0 at eisa.0
[17179571.744000] Cannot allocate resource for EISA slot 4
[17179571.744000] Cannot allocate resource for EISA slot 5
[17179571.744000] EISA: Detected 0 cards.
[17179571.744000] NET: Registered protocol family 2
[17179571.768000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.788000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.788000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
[17179571.792000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[17179571.792000] TCP: Hash tables configured (established 262144 bind 65536)
[17179571.792000] TCP reno registered
[17179571.792000] TCP bic registered
[17179571.792000] NET: Registered protocol family 1
[17179571.792000] NET: Registered protocol family 8
[17179571.792000] NET: Registered protocol family 20
[17179571.792000] Using IPI No-Shortcut mode
[17179571.792000] ACPI wakeup devices:
[17179571.792000] HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
[17179571.792000] ACPI: (supports S0 S1 S4 S5)
[17179571.792000] Freeing unused kernel memory: 332k freed
[17179571.836000] vga16fb: initializing
[17179571.836000] vga16fb: mapped to 0xc00a0000
[17179572.024000] Console: switching to colour frame buffer device 80x25
[17179572.024000] fb0: VGA16 VGA frame buffer device
[17179573.216000] Capability LSM initialized
[17179573.812000] SCSI subsystem initialized
[17179573.816000] ACPI: bus type scsi registered
[17179573.816000] libata version 1.20 loaded.
[17179573.820000] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[17179573.820000] NFORCE2: chipset revision 162
[17179573.820000] NFORCE2: not 100% native mode: will probe irqs later
[17179573.820000] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[17179573.820000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[17179573.820000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[17179573.820000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[17179573.820000] Probing IDE interface ide0...
[17179574.112000] hda: ST3160023A, ATA DISK drive
[17179574.400000] hdb: ST3120026A, ATA DISK drive
[17179574.460000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.468000] Probing IDE interface ide1...
[17179575.484000] hdd: PIONEER DVD-RW DVR-103, ATAPI CD/DVD-ROM drive
[17179575.544000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.560000] hda: max request size: 1024KiB
[17179575.564000] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
[17179575.564000] hda: cache flushes supported
[17179575.564000] hda: hda1 hda2 < hda5 >
[17179575.600000] hdb: max request size: 1024KiB
[17179575.600000] hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[17179575.600000] hdb: cache flushes supported
[17179575.600000] hdb: hdb1
[17179575.604000] hdd: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, DMA
[17179575.604000] Uniform CD-ROM driver Revision: 3.20
[17179575.932000] usbcore: registered new driver usbfs
[17179575.932000] usbcore: registered new driver hub
[17179575.932000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179575.932000] **** SET: Misaligned resource pointer: df8cb922 Type 07 Len 0
[17179575.968000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[17179575.968000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 177
[17179575.968000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179575.968000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179575.968000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179575.968000] ohci_hcd 0000:00:02.0: irq 177, io mem 0xe8002000
[17179576.028000] hub 1-0:1.0: USB hub found
[17179576.028000] hub 1-0:1.0: 3 ports detected
[17179576.136000] **** SET: Misaligned resource pointer: df8cb7a2 Type 07 Len 0
[17179576.136000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[17179576.136000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 185
[17179576.136000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179576.136000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179576.136000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179576.136000] ohci_hcd 0000:00:02.1: irq 185, io mem 0xe8003000
[17179576.196000] hub 2-0:1.0: USB hub found
[17179576.196000] hub 2-0:1.0: 3 ports detected
[17179576.304000] **** SET: Misaligned resource pointer: df8cb622 Type 07 Len 0
[17179576.304000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[17179576.304000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 193
[17179576.304000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179576.304000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179576.304000] ehci_hcd 0000:00:02.2: debug port 1
[17179576.304000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179576.304000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[17179576.304000] ehci_hcd 0000:00:02.2: irq 193, io mem 0xe8004000
[17179576.304000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.304000] hub 3-0:1.0: USB hub found
[17179576.304000] hub 3-0:1.0: 6 ports detected
[17179576.412000] hub 3-0:1.0: over-current change on port 1
[17179576.472000] Attempting manual resume
[17179576.484000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179576.484000] EXT3-fs: write access will be enabled during recovery.
[17179578.440000] hub 3-0:1.0: connect-debounce failed, port 1 disabled
[17179578.440000] hub 3-0:1.0: over-current change on port 2
[17179578.552000] EXT3-fs: recovery complete.
[17179578.552000] kjournald starting. Commit interval 5 seconds
[17179578.552000] EXT3-fs: mounted filesystem with ordered data mode.
[17179580.468000] hub 3-0:1.0: connect-debounce failed, port 2 disabled
[17179580.468000] hub 3-0:1.0: over-current change on port 3
[17179582.496000] hub 3-0:1.0: connect-debounce failed, port 3 disabled
[17179582.496000] hub 3-0:1.0: over-current change on port 4
[17179584.524000] hub 3-0:1.0: connect-debounce failed, port 4 disabled
[17179584.524000] hub 3-0:1.0: over-current change on port 5
[17179586.568000] hub 3-0:1.0: connect-debounce failed, port 5 disabled
[17179586.568000] hub 3-0:1.0: over-current change on port 6
[17179588.092000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.120000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179588.140000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[17179588.140000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[17179588.168000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.196000] agpgart: Detected NVIDIA nForce2 chipset
[17179588.200000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179588.316000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179588.316000] **** SET: Misaligned resource pointer: f6fade82 Type 07 Len 0
[17179588.316000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[17179588.316000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 177
[17179588.316000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179588.564000] FDC 0 is a post-1991 82077
[17179588.600000] hub 3-0:1.0: connect-debounce failed, port 6 disabled
[17179588.600000] hub 3-0:1.0: over-current change on port 1
[17179588.680000] input: PC Speaker as /class/input/input1
[17179588.812000] parport: PnPBIOS parport detected.
[17179588.812000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179588.840000] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0[17179588.840000] **** SET: Misaligned resource pointer: f6fadb82 Type 07 Len 0
[17179588.840000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[17179588.840000] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 201
[17179588.864000] nvidia: module license 'NVIDIA' taints kernel.
[17179589.116000] input: PS2++ Logitech MX Mouse as /class/input/input2
[17179589.128000] ts: Compaq touchscreen protocol output
[17179590.628000] hub 3-0:1.0: connect-debounce failed, port 1 disabled
[17179590.628000] hub 3-0:1.0: over-current change on port 2
[17179591.******] gameport: CS46xx Gameport is pci0000:01:09.0/gameport0, speed 932kHz
[17179591.432000] **** SET: Misaligned resource pointer: f6feaa22 Type 07 Len 0
[17179591.432000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179591.432000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 209
[17179591.432000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006
[17179591.448000] input: Analog 4-axis 4-button joystick as /class/input/input3
[17179592.220000] Intel ISA PCIC probe: not found.
[17179592.480000] lp0: using parport0 (interrupt-driven).
[17179592.664000] hub 3-0:1.0: connect-debounce failed, port 2 disabled
[17179592.664000] hub 3-0:1.0: over-current change on port 3
[17179592.692000] Adding 2650684k swap on /dev/hda5. Priority:-1 extents:1 across:2650684k
[17179592.900000] EXT3 FS on hda1, internal journal
[17179593.044000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179593.052000] NET: Registered protocol family 17
[17179593.272000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179593.272000] md: bitmap version 4.39
[17179594.612000] cdrom: open failed.
[17179594.688000] hub 3-0:1.0: connect-debounce failed, port 3 disabled
[17179594.688000] hub 3-0:1.0: over-current change on port 4
[17179596.272000] ACPI: Power Button (FF) [PWRF]
[17179596.272000] ACPI: Power Button (CM) [PWRB]
[17179596.360000] ibm_acpi: ec object not found
[17179596.388000] pcc_acpi: loading...
[17179596.712000] hub 3-0:1.0: connect-debounce failed, port 4 disabled
[17179596.712000] hub 3-0:1.0: over-current change on port 5
[17179597.300000] NET: Registered protocol family 10
[17179597.300000] lo: Disabled Privacy Extensions
[17179597.300000] IPv6 over IPv4 tunneling driver
[17179598.736000] hub 3-0:1.0: connect-debounce failed, port 5 disabled
[17179598.736000] hub 3-0:1.0: over-current change on port 6
[17179600.760000] hub 3-0:1.0: connect-debounce failed, port 6 disabled
[17179600.760000] hub 3-0:1.0: over-current change on port 1
[17179602.560000] ppdev: user-space parallel port driver
[17179602.800000] hub 3-0:1.0: connect-debounce failed, port 1 disabled
[17179602.800000] hub 3-0:1.0: over-current change on port 2