Lucky_Dave
01-09-2005, 04:34 PM
Hello there. Thanks for taking the time to read this message. ;)
I've spent several days (and nights !) trying to install my BeWan ADSL USB ST modem under Linux Debian (Sarge) with a 2.6.10 kernel (self-compiled).
First, I had a problem compiling the drivers for the modem. In the unicorn_usbdrv.c source file, urb->timeout is used, but the compiler tells me the timout member does not exist in the urb structure. So I made some changes to the driver source and it compiled without any problem.
Next step, loading the module. It does load, and the PWR led of my modem does turn green, but... The SYNC blinks, then stays red for a while, then blinks again... and the LINK led stays off. I have this in my syslog:
Jan 9 17:23:29 debian kernel: usb 2-2: new full speed USB device using uhci_hcd and address 2
Jan 9 17:26:33 debian kernel: unicorn_usb_atm: module license 'Proprietary' taints kernel.
Jan 9 17:26:33 debian kernel: unicorn_usb: v 0.8.6, 02:22:41 Jan 9 2005
Jan 9 17:26:33 debian kernel: unicorn_usb: driver parameters: DebugLevel=1
Jan 9 17:26:33 debian kernel: unicorn_usb: found adapter VendorId 07fa, ProductId 1012, driver_info=20174
Jan 9 17:26:33 debian kernel: unicorn_usb: MSW parameters:
Jan 9 17:26:33 debian kernel: ActivationMode=4
Jan 9 17:26:33 debian kernel: ActTimeout=300000
Jan 9 17:26:33 debian kernel: AutoActivation=1
Jan 9 17:26:33 debian kernel: DebugLevel=1
Jan 9 17:26:33 debian kernel: DownstreamRate=3400
Jan 9 17:26:33 debian kernel: unicorn_usb: ExchangeDelay=10
Jan 9 17:26:33 debian kernel: FmPollingRate=1000
Jan 9 17:26:33 debian kernel: g_RefGain=22
Jan 9 17:26:33 debian kernel: g_Teqmode=7
Jan 9 17:26:33 debian kernel: InitTimeout=20000
Jan 9 17:26:33 debian kernel: Interoperability=0
Jan 9 17:26:33 debian kernel: unicorn_usb: LCD_Trig=15000
Jan 9 17:26:33 debian kernel: LOS_LOF_Trig=5000
Jan 9 17:26:33 debian kernel: LoopbackMode=0
Jan 9 17:26:33 debian kernel: MswDebugLevel=2
Jan 9 17:26:33 debian kernel: RetryTime=5000
Jan 9 17:26:33 debian kernel: TrainingDelay=100
Jan 9 17:26:33 debian kernel: unicorn_usb: useRFC019v=0
Jan 9 17:26:33 debian kernel: useRFC029v=8000
Jan 9 17:26:33 debian kernel: useRFC040v=0
Jan 9 17:26:33 debian kernel: useRFC041v=1
Jan 9 17:26:33 debian kernel: setINITIALDAC=0
Jan 9 17:26:33 debian kernel: unicorn_usb: useRFCFixedRate=1
Jan 9 17:26:33 debian kernel: useVCXO=0
Jan 9 17:26:33 debian kernel: _no_TS652=1
Jan 9 17:26:33 debian kernel: useAFE=20174
Jan 9 17:26:33 debian kernel: txPower=14
Jan 9 17:26:33 debian kernel: rapi_init: HZ=1000
Jan 9 17:26:33 debian kernel: rapi_init: start_time=1481398307
Jan 9 17:26:33 debian kernel: unicorn_usb: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Jan 9 17:26:33 debian kernel: do_probe: FrameNumber=0
Jan 9 17:26:33 debian kernel: set_packetsize: EP 02,change MPS from 128 to 128
Jan 9 17:26:33 debian kernel: set_packetsize: EP 83,change MPS from 128 to 128
Jan 9 17:26:33 debian kernel: set_packetsize: EP 04,change MPS from 168 to 0
Jan 9 17:26:33 debian kernel: set_packetsize: EP 85,change MPS from 448 to 0
Jan 9 17:26:33 debian kernel: start_hardware:
Jan 9 17:26:33 debian kernel: unicorn_attach: entrypoints=d0b57b54
Jan 9 17:26:33 debian kernel: unicorn_atm_startdevice: itf=0
Jan 9 17:26:33 debian kernel: USB_init: dev=d0b5dae0
Jan 9 17:26:33 debian kernel: unicorn_msw: FmPollingRate=1000ms,InitTimeout=20000ms,ActTimeou t=300000
Jan 9 17:26:33 debian kernel: unicorn_usb: AdslStatus=1
Jan 9 17:26:33 debian kernel: usbcore: registered new driver unicorn_usb
Jan 9 17:26:34 debian kernel: unicorn_msw: Current Modem State (3): ACTIVATING
Jan 9 17:26:34 debian kernel: unicorn_usb: MSW state: ACTIVATING
Jan 9 17:26:34 debian kernel: unicorn_msw: Event Reported (3): Initializing
Jan 9 17:26:34 debian kernel: unicorn_usb: MSW event: TO INITIALIZING
Jan 9 17:26:36 debian kernel: unicorn_usb: AdslStatus=1
Jan 9 17:26:36 debian kernel: unicorn_msw: Modem Init Failure: Spurious ATU Detected (25)
Jan 9 17:26:36 debian kernel: unicorn_usb: MSW failure: SPURIOUS ATU DETECTED
Jan 9 17:26:47 debian kernel: unicorn_usb: AMU_EVENT_RETRY
Jan 9 17:26:47 debian kernel: unicorn_usb: AdslStatus=1
Jan 9 17:26:48 debian kernel: unicorn_msw: Current Modem State (3): ACTIVATING
Jan 9 17:26:48 debian kernel: unicorn_usb: MSW state: ACTIVATING
Jan 9 17:26:48 debian kernel: unicorn_msw: Event Reported (3): Initializing
Jan 9 17:26:48 debian kernel: unicorn_usb: MSW event: TO INITIALIZING
Jan 9 17:26:49 debian kernel: get_modemstate: ADSL modem state Ghs HANDSHAKING
Jan 9 17:26:49 debian kernel: get_link_rate: upstream_rate=0 Kbits/s,downstream_rate=0 Kbits/s,link_rate=0 cells/sec
Jan 9 17:26:50 debian kernel: unicorn_usb: AdslStatus=1
Jan 9 17:26:50 debian kernel: unicorn_msw: Modem Init Failure: Spurious ATU Detected (25)
Jan 9 17:26:50 debian kernel: unicorn_usb: MSW failure: SPURIOUS ATU DETECTED
Then it keeps cycling between IDLE, INITIALIZING, ACTIVATING...
First, none of the tutorials I found mentionned that the modem would be in the "HANDSHAKING" state at any time. Then, this "SPURIOUS ATU DETECTED" is obviously not normal. There's also this "0.8.6" version number that appears while I have the "0.8.7" version of the drivers, but I don't think this is doing anything.
Concerning the "SPURIOUS ATU DETECTED" problem, some wesbites suggested to use the G.lite modulation rather than the Gdmt modulation, but it didn't change anything. Anyway, I should use the Gdmt.
I think I'm out of ideas... If anybody could help me, even just a bit, I'd be very grateful to him.
Thanks in advance.
I've spent several days (and nights !) trying to install my BeWan ADSL USB ST modem under Linux Debian (Sarge) with a 2.6.10 kernel (self-compiled).
First, I had a problem compiling the drivers for the modem. In the unicorn_usbdrv.c source file, urb->timeout is used, but the compiler tells me the timout member does not exist in the urb structure. So I made some changes to the driver source and it compiled without any problem.
Next step, loading the module. It does load, and the PWR led of my modem does turn green, but... The SYNC blinks, then stays red for a while, then blinks again... and the LINK led stays off. I have this in my syslog:
Jan 9 17:23:29 debian kernel: usb 2-2: new full speed USB device using uhci_hcd and address 2
Jan 9 17:26:33 debian kernel: unicorn_usb_atm: module license 'Proprietary' taints kernel.
Jan 9 17:26:33 debian kernel: unicorn_usb: v 0.8.6, 02:22:41 Jan 9 2005
Jan 9 17:26:33 debian kernel: unicorn_usb: driver parameters: DebugLevel=1
Jan 9 17:26:33 debian kernel: unicorn_usb: found adapter VendorId 07fa, ProductId 1012, driver_info=20174
Jan 9 17:26:33 debian kernel: unicorn_usb: MSW parameters:
Jan 9 17:26:33 debian kernel: ActivationMode=4
Jan 9 17:26:33 debian kernel: ActTimeout=300000
Jan 9 17:26:33 debian kernel: AutoActivation=1
Jan 9 17:26:33 debian kernel: DebugLevel=1
Jan 9 17:26:33 debian kernel: DownstreamRate=3400
Jan 9 17:26:33 debian kernel: unicorn_usb: ExchangeDelay=10
Jan 9 17:26:33 debian kernel: FmPollingRate=1000
Jan 9 17:26:33 debian kernel: g_RefGain=22
Jan 9 17:26:33 debian kernel: g_Teqmode=7
Jan 9 17:26:33 debian kernel: InitTimeout=20000
Jan 9 17:26:33 debian kernel: Interoperability=0
Jan 9 17:26:33 debian kernel: unicorn_usb: LCD_Trig=15000
Jan 9 17:26:33 debian kernel: LOS_LOF_Trig=5000
Jan 9 17:26:33 debian kernel: LoopbackMode=0
Jan 9 17:26:33 debian kernel: MswDebugLevel=2
Jan 9 17:26:33 debian kernel: RetryTime=5000
Jan 9 17:26:33 debian kernel: TrainingDelay=100
Jan 9 17:26:33 debian kernel: unicorn_usb: useRFC019v=0
Jan 9 17:26:33 debian kernel: useRFC029v=8000
Jan 9 17:26:33 debian kernel: useRFC040v=0
Jan 9 17:26:33 debian kernel: useRFC041v=1
Jan 9 17:26:33 debian kernel: setINITIALDAC=0
Jan 9 17:26:33 debian kernel: unicorn_usb: useRFCFixedRate=1
Jan 9 17:26:33 debian kernel: useVCXO=0
Jan 9 17:26:33 debian kernel: _no_TS652=1
Jan 9 17:26:33 debian kernel: useAFE=20174
Jan 9 17:26:33 debian kernel: txPower=14
Jan 9 17:26:33 debian kernel: rapi_init: HZ=1000
Jan 9 17:26:33 debian kernel: rapi_init: start_time=1481398307
Jan 9 17:26:33 debian kernel: unicorn_usb: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Jan 9 17:26:33 debian kernel: do_probe: FrameNumber=0
Jan 9 17:26:33 debian kernel: set_packetsize: EP 02,change MPS from 128 to 128
Jan 9 17:26:33 debian kernel: set_packetsize: EP 83,change MPS from 128 to 128
Jan 9 17:26:33 debian kernel: set_packetsize: EP 04,change MPS from 168 to 0
Jan 9 17:26:33 debian kernel: set_packetsize: EP 85,change MPS from 448 to 0
Jan 9 17:26:33 debian kernel: start_hardware:
Jan 9 17:26:33 debian kernel: unicorn_attach: entrypoints=d0b57b54
Jan 9 17:26:33 debian kernel: unicorn_atm_startdevice: itf=0
Jan 9 17:26:33 debian kernel: USB_init: dev=d0b5dae0
Jan 9 17:26:33 debian kernel: unicorn_msw: FmPollingRate=1000ms,InitTimeout=20000ms,ActTimeou t=300000
Jan 9 17:26:33 debian kernel: unicorn_usb: AdslStatus=1
Jan 9 17:26:33 debian kernel: usbcore: registered new driver unicorn_usb
Jan 9 17:26:34 debian kernel: unicorn_msw: Current Modem State (3): ACTIVATING
Jan 9 17:26:34 debian kernel: unicorn_usb: MSW state: ACTIVATING
Jan 9 17:26:34 debian kernel: unicorn_msw: Event Reported (3): Initializing
Jan 9 17:26:34 debian kernel: unicorn_usb: MSW event: TO INITIALIZING
Jan 9 17:26:36 debian kernel: unicorn_usb: AdslStatus=1
Jan 9 17:26:36 debian kernel: unicorn_msw: Modem Init Failure: Spurious ATU Detected (25)
Jan 9 17:26:36 debian kernel: unicorn_usb: MSW failure: SPURIOUS ATU DETECTED
Jan 9 17:26:47 debian kernel: unicorn_usb: AMU_EVENT_RETRY
Jan 9 17:26:47 debian kernel: unicorn_usb: AdslStatus=1
Jan 9 17:26:48 debian kernel: unicorn_msw: Current Modem State (3): ACTIVATING
Jan 9 17:26:48 debian kernel: unicorn_usb: MSW state: ACTIVATING
Jan 9 17:26:48 debian kernel: unicorn_msw: Event Reported (3): Initializing
Jan 9 17:26:48 debian kernel: unicorn_usb: MSW event: TO INITIALIZING
Jan 9 17:26:49 debian kernel: get_modemstate: ADSL modem state Ghs HANDSHAKING
Jan 9 17:26:49 debian kernel: get_link_rate: upstream_rate=0 Kbits/s,downstream_rate=0 Kbits/s,link_rate=0 cells/sec
Jan 9 17:26:50 debian kernel: unicorn_usb: AdslStatus=1
Jan 9 17:26:50 debian kernel: unicorn_msw: Modem Init Failure: Spurious ATU Detected (25)
Jan 9 17:26:50 debian kernel: unicorn_usb: MSW failure: SPURIOUS ATU DETECTED
Then it keeps cycling between IDLE, INITIALIZING, ACTIVATING...
First, none of the tutorials I found mentionned that the modem would be in the "HANDSHAKING" state at any time. Then, this "SPURIOUS ATU DETECTED" is obviously not normal. There's also this "0.8.6" version number that appears while I have the "0.8.7" version of the drivers, but I don't think this is doing anything.
Concerning the "SPURIOUS ATU DETECTED" problem, some wesbites suggested to use the G.lite modulation rather than the Gdmt modulation, but it didn't change anything. Anyway, I should use the Gdmt.
I think I'm out of ideas... If anybody could help me, even just a bit, I'd be very grateful to him.
Thanks in advance.