florian.muenkel@gmx.net
11-05-2001, 02:13 PM
i need modem emulation for hylafax and i have a fritz!pci card installed in my box. and i set it to avm b1 pci, just like the setup wanted me to..
but when i execute faxaddmodem then the tool asks for the serial port of the modem...someone told me to try ttyI1...and it seemed to work, he checks for the best speed but then i get this message:
-----------------------------------------------------------
38400 OK.
[1]+ Terminated ( trap "" 0 1 2; while true; do
sleep 10; echo ""; echo "Hmm, something seems to be hung, check your modem eh?";
done )
The result of the AT+FCLASS=? command was:
ATQ0V1E1
OK
AT+FCLASS=?
0,8
OK
We were unable to deduce what type of modem you have. This means that
it did not respond as a Class 1, Class 2, or Class 2.0 modem should.
If you believe that your modem conforms to the Class 1, Class 2, or
Class 2.0 interface specification, then check that the modem is
operating properly and that you can communicate with the modem from the
host. If your modem is not one of the above types of modems, then this
software does not support it and you will need to write a driver that
supports it.
------------------------------------------------------------
but i think everything is installed correctly...
capiinfo echoes:
------------------------------------------------------------
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.09-10 (48.154)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 fro fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x800000bf
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
reserved
0100
0200
39000000
1f010040
1b0b0000
bf000080
00000000 00000000 00000000 00000000 00000000 00000000
01000001 00020000 00000000 00000000 00000000
Supplementary services support: 0x000003ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
------------------------------------------------------------
can u please help me (i know it's much text)? =)
but when i execute faxaddmodem then the tool asks for the serial port of the modem...someone told me to try ttyI1...and it seemed to work, he checks for the best speed but then i get this message:
-----------------------------------------------------------
38400 OK.
[1]+ Terminated ( trap "" 0 1 2; while true; do
sleep 10; echo ""; echo "Hmm, something seems to be hung, check your modem eh?";
done )
The result of the AT+FCLASS=? command was:
ATQ0V1E1
OK
AT+FCLASS=?
0,8
OK
We were unable to deduce what type of modem you have. This means that
it did not respond as a Class 1, Class 2, or Class 2.0 modem should.
If you believe that your modem conforms to the Class 1, Class 2, or
Class 2.0 interface specification, then check that the modem is
operating properly and that you can communicate with the modem from the
host. If your modem is not one of the above types of modems, then this
software does not support it and you will need to write a driver that
supports it.
------------------------------------------------------------
but i think everything is installed correctly...
capiinfo echoes:
------------------------------------------------------------
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.09-10 (48.154)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 fro fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x800000bf
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
reserved
0100
0200
39000000
1f010040
1b0b0000
bf000080
00000000 00000000 00000000 00000000 00000000 00000000
01000001 00020000 00000000 00000000 00000000
Supplementary services support: 0x000003ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
------------------------------------------------------------
can u please help me (i know it's much text)? =)