733mhz p3 to 933mhz p3 upgrade ?

[neotrace]

We're going to pull the peripherals out of one machine and put them in another with a slightly faster processor and more memory. Is there anything I should look out for?

Current (733mhz):

-
class: OTHER
bus: PCI
detached: 0
driver: agpgart
desc: "VIA Technologies|VT82C693A/694x [Apollo PRO133x]"
vendorId: 1106
deviceId: 0691
subVendorId: 1043
subDeviceId: 8017
pciType: 1
-
class: OTHER
bus: PCI
detached: 0
driver: ignore
desc: "VIA Technologies|VT82C598/694x [Apollo MVP3/Pro133x AGP]"
vendorId: 1106
deviceId: 8598
subVendorId: 0000
subDeviceId: 0000
pciType: 1
-
class: OTHER
bus: PCI
detached: 0
driver: ignore
desc: "VIA Technologies|VT82C596 ISA [Mobile South]"
vendorId: 1106
deviceId: 0596
subVendorId: 1043
subDeviceId: 8017
pciType: 1
-
class: OTHER
bus: PCI
detached: 0
driver: ignore
desc: "VIA Technologies|VT82C586B PIPC Bus Master IDE"
vendorId: 1106
deviceId: 0571
subVendorId: 0000
subDeviceId: 0000
pciType: 1
-
class: OTHER
bus: PCI
detached: 0
driver: unknown
desc: "VIA Technologies|VT82C596 Power Management"
vendorId: 1106
deviceId: 3050
subVendorId: 0000
subDeviceId: 0000
pciType: 1
-
class: OTHER
bus: USB
detached: 0
driver: unknown
desc: "USB UHCI Root Hub"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 1
usblevel: 0
usbport: 0
vendorId: 0000
deviceId: 0000
productrevision: unknown
-
class: NETWORK
bus: PCI
detached: 0
device: eth
driver: eepro100
desc: "Intel Corp.|82557/8/9 [Ethernet Pro 100]"
vendorId: 8086
deviceId: 1229
subVendorId: 8086
subDeviceId: 000c
pciType: 1
-
class: NETWORK
bus: PCI
detached: 0
device: eth
driver: 3c59x
desc: "3Com Corporation|3c905B 100BaseTX [Cyclone]"
vendorId: 10b7
deviceId: 9055
subVendorId: 10b7
subDeviceId: 9055
pciType: 1
-
class: MOUSE
bus: PSAUX
detached: 0
device: psaux
driver: genericps/2
desc: "Generic Mouse (PS/2)"
-
class: CDROM
bus: IDE
detached: 0
device: hdc
driver: ignore
desc: "FX4824T"
-
class: VIDEO
bus: PCI
detached: 0
driver: Card:S3 ViRGE (generic)
desc: "S3 Inc.|ViRGE/DX or /GX"
vendorId: 5333
deviceId: 8a01
subVendorId: 5333
subDeviceId: 8a01
pciType: 1
-
class: HD
bus: IDE
detached: 0
device: hda
driver: ignore
desc: "FUJITSU MPD3043AT"
physical: 8940/15/63
logical: 525/255/63
-
class: HD
bus: IDE
detached: 0
device: hdb
driver: ignore
desc: "Maxtor 91536U6"
physical: 29762/16/63
logical: 1867/255/63
-
class: USB
bus: PCI
detached: 0
driver: usb-uhci
desc: "VIA Technologies|USB"
vendorId: 1106
deviceId: 3038
subVendorId: 0925
subDeviceId: 1234
pciType: 1

[endoalpha]

What are you asking?
Wear a grounding strap.

[neotrace]

=), lol, i've upgraded redhat before but never upgraded hardware, and was just wondering if there are any specifics or quirks, IE ~ will the system automagically update the larger amount of memory or do I have to specify, same with the processor? Will the eth0 and eth1 stay the same even the cards are the same though the MOBO is different?

[Modorf]

you will probably want to re-compile the kernel for the new hardware. Other than that, it should work the same, you if you have two of anything, ie NICs, then you will want to double check that.

Otherwise I think you can do a plug and play. You probably want some form of a current rescue disk around just in case all blows up.

Nathan.

[neotrace]

I know this is off topic, but I usually just update from the lastest kernel rpm from redhat so is there away to simply recompile, would I need the source?

Thanks for your time

[garskoci]

I'm pretty much doing the same upgrade. Sort of. I'm swapping the P3 733 for two P3 933's, plus a new mommaboard, video card etc. Almost a new computer.
I have my grounding strap!!!

[neotrace]

alright great, thanks for everyones time once again